When it comes to repairing small nicks and scratches in your car’s paint job, Motorcraft touch-up paint is the way to go. This high-quality paint is an exact match for the paint used on Ford, Lincoln, and Mercury vehicles, so you can rest assured that your repairs will be virtually undetectable. Plus, touch-up paint is much less expensive than taking your car to a body shop.
Here’s how to use Motorcraft touch-up paint to keep your car’s paint looking like new.
TOUCH UP PAINT – THE KEY TO FIXING ROCK CHIPS
- Shake the can of touch-up paint for at least one minute before use
- Clean the area to be painted with rubbing alcohol or a similar cleaner
- Apply touch-up paint to the area using a cotton swab, Q-tip, or small brush
- Allow the paint to dry for at least 24 hours before driving or washing the vehicle
How to use touch up paint pen
If you have a small scratch or ding in your car, you can easily touch it up with a touch-up paint pen. These pens are filled with automotive paint and have a fine tip that makes it easy to apply the paint to your car. Touch-up paint pens are available at most auto parts stores and are relatively inexpensive.
Once the paint is dry, you can polish or wax the area to blend it in with the rest of your car’s paint job.
How do you touch-up paint like a pro?
Touch-up paint can be a great way to fix small imperfections in your paint job or simply change the color of your walls without having to repaint the entire room. Here are a few tips on how to touch-up paint like a pro:
- Use a small brush. A small brush will allow you to be more precise with your touch-ups.
- Use a similar color to the surrounding paint. This will help your touch-ups blend in better.
- Apply the paint in thin layers. This will prevent the paint from dripping or running.
- Allow each layer of paint to dry completely before adding another. This will ensure a smooth, even finish.
- Use a small piece of sandpaper to lightly sand the area before painting. This will help the paint adhere better and give you a smooth finish. With these tips, you can touch up your paint job like a pro!
How do you apply touch-up paint to a car?
It’s important to know how to touch-up paint on a car in order to keep it looking its best. Here are some tips on how to do just that:
- Clean the area to be painted with rubbing alcohol or another cleaner designed for automotive use. This will help the paint adhere better.
- Use a small paintbrush or foam applicator to apply the touch-up paint to the area.
- Apply the paint in thin coats, allowing each coat to dry completely before applying the next.
- Once the touch-up paint has dried, apply a clearcoat to protect it from the elements and give it a glossy finish.
How do you smooth touch-up paint on a car?
When you want to touch up paint on your car, the best way to get a smooth finish is to use a paint pen or a small paintbrush. Before you start, make sure that the area you are going to paint is clean and dry. Then, use fine-grit sandpaper to lightly sand the area around the scratch or chip.
This will help the paint to adhere to the car. Next, apply a thin layer of paint to the area. If you are using a paint pen, be sure to follow the manufacturer’s instructions.
Once the paint is dry, use a clearcoat pen or a small paintbrush to apply a layer of clear coat to the area. This will protect the paint and give it a glossy finish.
How do you use Motorcraft touch-up paint pen?
Assuming you are talking about the Motorcraft Perfect Match Scratch Clear Touch-Up Paint Pen: To use, unscrew the cap and insert the nib into the bottle. Gently squeeze the bottle until the nib is saturated with paint.
Dab off excess paint on a paper towel. Apply paint to the scratched area by holding the nib perpendicular to the surface. Touch up small areas by dabbing on the paint.
Larger areas may require a light back-and-forth motion. Let dry for 30 minutes. Screw on cap to store for future use.
If your car has a few paint chips, you can easily touch them up with Motorcraft touch-up paint. First, find the paint code for your car. This should be listed on the door jamb or in the owner’s manual.
Once you have the code, purchase the corresponding touch-up paint. When you’re ready to touch up the paint, clean the area around the chip with alcohol. Then, using a toothpick or other small object, apply the paint to the chip.
Let the paint dry for 24 hours before washing or waxing the area.